MAGNETIC DRIVE PUMPS

Chemquip Magnetic drive sealless Pumps are horizontal end suction, centrifugal process pumps designed and built to ISO2858 (BS-EN22858/DIN24256)/ISO 5199 or ANSI/ASME B73.1M Standards. The materials of construction include stainless steels, Hastelloy, Titanium, PTFE, PFA, PVDF, FEP, PP and PE-UHMW.

The comprehensive range incorporates all the positive design advantages desired in a modern pump. From vertical in-line and self-priming versions, through non-metallic double can arrangements which eliminate eddy currents increasing efficiency (as energy is not dissipated as heat) and allowing solids passage (as the magnet separation can be increased from the close tolerances of metal can arrangements), to short periods of dry running without damage, using Silicon Carbide diamond bearings (diamond like running surfaces with extremely low coefficient of friction). The solids handling capability can be increased firstly by the use of a filter or external liquor-flush to the bearings and more comprehensively by utilising a recessed impeller to create a Vortex pump capable of handling slurry services.

Mechanically sealed    
Variable speed drives
Series

'Sealless Metallic Magnetic Drive Pump'

  • Close coupled or Frame Mounted long coupled Design
  • Flow Rates 0.1 to 180m/h, Max 60 Metres head
  • Operating Range -100C to +320C
  • 16 Bar rated at 20C
  • available in CS, St.St., Hastelloy and titanium
  • Pure SiC Plain Bearings for Dry Running protection
  • Dimensions to ISO 2858
 
Series MNK
Series MNK heavy-duty ISO class magnetic drive pump

'Sealless Magnetic Drive Pump'

  • Long coupled frame mounted or close coupled design
  • Flow Rates 0.1 to 180m/h, Max 80 Metres head
  • Operating Range -60C to +180C
  • 16 Bar rated at 20C
  • Universal Chemical resistance with PFA,PTFE,PVDF
  • Pure SiC "Safeglide Plus" Plain Bearings for Guaranteed Dry Running
  • Dimensions to ISO 2858
 
Series MNKA
Series MNK-A heavy-duty ANSI class magnetic drive pump

'ANSI Sealless Magnetic Drive Pump'

  • Frame Mounted Design
  • Flow Rates 0.1 to 180m/h, Max 80 Metres head
  • Operating Range -30C to +180C
  • 16 Bar rated at 20C
  • Universal Chemical resistance with PFA,PTFE,PVDF Pure Sic "Safeglide Plus" Plain Bearings for Guaranteed Dry Running
  • Dimensions to ANSI B73.4
 
Series MNK-X

'Vortex Pump'

  • Frame Mounted Design
  • Higher solids contents and Particles up to 20mm
  • Handles fluids with up to 5% Gas Content by volume
  • Flow Rates up to 200m/h, Max 85 Metres head
  • Operating Range -60C to +180C
  • Close Coupled Version Available Pure SiC "Safeglide Plus" Plain Bearings for Guaranteed Dry Running
  • Dimensions to ISO 2858
back to top
home
back to general pumps page
Variable speed drives
mechanically sealed

Disclaimer
Privacy policy

© Chemquip Ltd copyright 2004, all rights reserved